SUBWAY CERAMICS

CATALOG

Request A Design Consultation

All Products

Showing all 251 results

3″ bevel inside corner cove
$14.35
3″ bevel outside corner round
$14.35
6″ sanitary cove base – outside corner
$19.52
Quarter cove 3-way corner
$12.87
quarter cove – outside corner
$21.18
Quarter round 3-way corner
$12.87
2″ mud cap – inside corner
$18.64
6″ Quarter Cove / Mud Cap inside corner
$19.52
1/2″ x 6″ flat accent liner
$6.49
1/2″ x 6″ flat liner liner – surface bullnose
$10.72
6″ quarter round
$6.49
6″ quarter round beak
$13.04
6″ bullnose Quarter Round [for use with surface trim]
$12.87
1/2″ x 6″ radius bullnose – short trim
$16.34
1/2″ x 6″ radius cove – short trim
$16.34
6″ Roman straight base moulding – outside corner
$15.68
6″ shoulder cove base – outside corner
$21.45
6″ quarter cove
$6.49
6″ quarter cove beak/sanitary cove base – inside corner
$13.04
6″ bullnose quarter cove – inside corner
$19.52
2″ x 2″ smooth top P-cap molding – frame inside corner
$26.02
Series 15 – Box Cap inside corner with 1″ inside radius
$16.95
Series 15 – quarter cove – outside corner – 3 way
$24.39
Series 15 – quarter cove – outside corner
$24.39
Series 15 – quarter cove – inside corner – standard radius
$24.39
Series 15 – quarter cove – inside corner – non-radius
$24.39
6″ shoulder cove base – inside corner
$21.45
2″ x 2″ P-cap molding – frame outside corner
$26.02
2″ x 2″ P-cap molding – frame inside corner
$26.02
2″ x 2″ smooth top P-cap molding – frame outside corner
$26.02
Series 15 – 3″ x 4-1/2″ radius bullnose
$15.15
Series 15 – 3″ x 7-3/8″ soft radius bullnose
$15.45
Series 15 – 3″ x 12″ soft radius bullnose – LONG side
$19.45
Series 15 – 3″ x 4-1/2″ radius cove
$15.15
Series 15 – quarter cove – inside corner – 3 way
$24.39
Series 15 – 6″ quarter cove
$17.95
Series 15 – quarter round – ouside corner
$24.39
Series 15 – quarter round – inside corner
$24.39
Series 15 – quarter round – 3 way
$24.39
Series 15 – 6″ quarter round
$17.95
1-1/2″ x 6″ P-cap molding
$13.53
1-1/2″ x 6″ P-cap molding – conventional outside corner return – left
$26.02
1-1/2″ x 6″ P-cap molding – conventional outside corner return – right
$26.02
1-1/2″ x 6″ P-cap molding – end stop – left
$26.02
Series 15 – 3″ x 7-3/8″ soft radius cove
$15.45
1-1/2″ x 6″ P-cap molding – end stop – right
$26.02
Series 15 – 3″ x 12″ soft radius cove – LONG side
$19.45
1-1/2″ x 6″ P-cap molding – inside corner cove – left
$26.02
Series 15 – 1″ x 3″ square up corner – RIGHT
$17.95
Series 15 – 3″ x 1″ square up corner – LEFT
$17.95
1-1/2″ x 6″ extended P-cap molding – end stop – right
$26.02
1-1/2″ x 6″ P-cap molding – inside corner cove – right
$26.02
1-1/2″ x 6″ P-cap molding – bullnose end stop left
$26.02
1-1/2″ x 6″ P-cap molding – bullnose end stop right
$26.02
1-1/2″ x 6″ P-cap molding – radius outside corner return – left
$26.02
1-1/2″ x 6″ P-cap molding – radius outside corner return – right
$26.02
1-1/2″ x 6″ extended P-cap molding
$13.53
1-1/2″ x 6″ extended P-cap molding – radius outside corner return – left
$26.02
1-1/2″ x 6″ extended P-cap molding – radius outside corner return – right
$26.02
1-1/2″ x 6″ extended P-cap molding – end stop – left
$26.02
1-1/2″ x 6″ extended P-cap molding – inside corner cove – left
$26.02
1-1/2″ x 6″ extended P-cap molding – inside corner cove – right
$26.02
1-1/2″ x 6″ extended P-cap molding bullnose – end stop left
$26.02
1-1/2″ x 6″ extended P-cap molding bullnose – end stop right
$26.02
1-1/2″ x 6″ smooth top P-cap molding
$13.53
1-1/2″ x 6″ smooth top P-cap molding – conventional outside corner return – left
$26.02
1-1/2″ x 6″ smooth top P-cap molding – conventional outside corner return – right
$26.02
1-1/2″ x 6″ smooth top P-cap molding – end stop – left
$26.02
1-1/2″ x 6″ smooth top P-cap molding – end stop – right
$26.02
1-1/2″ x 6″ smooth top P-cap molding – inside corner cove – left
$26.02
1-1/2″ x 6″ extended/smooth top P-cap molding
$13.53
1-1/2″ x 6″ extended/smooth top P-cap molding – radius outside corner return – left
$26.02
1-1/2″ x 6″ extended/smooth top P-cap molding – radius outside corner return – right
$26.02
1-1/2″ x 6″ extended/smooth top P-cap molding – end stop – left
$26.02
1-1/2″ x 6″ extended/smooth top P-cap molding – end stop – right
$26.02
1-1/2″ x 6″ smooth top P-cap molding – inside corner cove – right
$26.02
1-1/2″ x 6″ smooth top P-cap molding – bullnose end stop – left
$26.02
1-1/2″ x 6″ smooth top P-cap molding – bullnose end stop – right
$26.02
1-1/2″ x 6″ smooth top P-cap molding – radius outside corner return – left
$26.02
1-1/2″ x 6″ smooth top P-cap molding – radius outside corner return – right
$26.02
1-1/2″ x 6″ extended/smooth top P-cap molding – inside corner cove – left
$26.02
1-1/2″ x 6″ extended/smooth top P-cap molding – inside corner cove – right
$26.02
1-1/2″ x 6″ extended/smooth top P-cap molding bullnose – end stop – left
$26.02
3.5″ x 5″ single standard switch cover plate
$24.42
1-1/2″ x 6″ extended/smooth top P-cap molding bullnose – end stop – right
$26.02
1″ x 6″ radius bullnose – short trim
$16.34
3.5″ x 5″ single duplex outlet cover plate
$24.42
1″ x 6″ radius cove – short trim
$16.34
3.5″ x 5″ single GFI/rocker switch cover plate w/ logo
$0.00
3.5″ x 5″ single GFI/rocker switch cover plate
$24.42
2″ x 2″ extended box cap moulding – frame outside corner
$26.02
2″ x 2″ extended box cap moulding – frame inside corner
$26.02
Series 20 – quarter cove – outside corner – 3 way
$24.39
2″ x 2″ box cap moulding – frame outside corner
$26.02
Series 20 – quarter cove – inside corner – 3 way
$24.39
2″ x 2″ box cap moulding – frame inside corner
$26.02
Series 20 – 6″ quarter cove
$17.95
Series 20 – quarter round – outside corner – 3 way
$24.39
Series 20 – quarter round – inside corner – 3 way
$24.39
Series 20 – 6″ quarter round
$17.95
2″ x 2-7/8″ radius bullnose – short
$17.93
2″ x 2-7/8″ radius cove – short
$17.93
2″ x 2″ radius down corner
$26.02
2-1/2″ x 2-1/2″ full radius up corner
$26.02
2″ x 2″ square radius up corner
$26.02
2″ x 2″ Ellis cove base – outside corner
$26.02
2″ x 2″ Ellis cove base – inside corner – standard radius
$26.02
2″ x 2″ Ellis cove base – inside corner – zero radius
$26.02
2-1/8″ x 2-1/8″ field tile
$21.84
2″ x 2″ Ellis cove base – inside corner – large radius
$26.02
2″ x 4-1/4″ field tile
$23.76
2″ x 3-3/4″ radius bullnose – short
$16.34
2″ x 3-3/4″ radius cove – short
$13.04
Series 25 – quarter cove – outside corner – 3 way
$24.39
Series 25 – quarter cove – inside corner – 3 way
$24.39
Series 25 – 6″ radius quarter cove
$17.95
Series 25 – quarter round – outside corner – 3 way
$24.39
2-1/8″ x 4-1/4″ surface bullnose – short
$12.32
2-1/8″ x 4-1/4″ field tile
$23.76
2-1/8″ x 4-1/4″ surface bullnose – long
$12.32
2-3/8” x 6” bevel cap molding
$16.28
2-3/8” bevel cap molding – outside corner
$26.02
2-3/8″bevel cap molding – inside corner
$26.02
Series 25 – quarter round – inside corner – 3 way
$24.39
Series 25 – 6″ radius quarter round
$17.95
2″ x 6″ extended box cap moulding
$13.53
Series 25 – 3″ x 5.5″ – radius bullnose
$18.75
2″ x 2″ Box cap extended – inside corner
$26.02
Series 25 – 4.25″ x 4.675″ – radius bullnose
$18.75
Series 25 – radius cove – 3″ x 5.875″
$15.15
2″ x 6″ extended box cap moulding – radius outside corner return – right
$26.02
2″ x 6″ extended box cap moulding – end stop – left
$26.02
2″ x 6″ extended box cap moulding – end stop – right
$26.02
2″ x 6″ box cap moulding
$13.53
2″ x 6″ box cap moulding – conventional outside corner return – left
$26.02
2″ x 6″ box cap moulding – conventional outside corner return – right
$26.02
2″ x 6″ box cap moulding – end stop – left
$26.02
2” x 6” bevel liner
$13.04
2” x 6” bevel liner – bevel outside corner trim/end stop
$18.37
2″ x 6″ extended box cap moulding – radius outside corner return – left
$26.02
2″ x 6″ Ellis cove base
$17.93
2″ x 6″ down corner – left
$17.76
2″ x 6″ down corner – right
$17.76
2″ x 6″ box cap moulding – end stop – right
$26.02
2″ x 6″ box cap moulding – inside corner cove – left
$26.02
2″ x 6″ box cap moulding – inside corner cove – right
$26.02
2″ x 6″ box cap moulding – bullnose end stop – left
$26.02
2″ x 6″ box cap moulding – bullnose end stop – right
$26.02
2″ x 6″ box cap moulding – radius outside corner return – left
$26.02
2″ x 6″ box cap moulding – radius outside corner return – right
$26.02
2″ x 6″ radius bullnose – short
$16.34
2″ x 6″ radius cove – short
$16.34
2″ x 6″ field tile
$21.62
2″ x 6″ bullnose – short
$12.32
2″ x 6″ bullnose – long
$12.32
5″ x 5″ double standard switch cover plate
$26.84
5″ x 5″ double switch & duplex outlet combination cover plate
$26.84
5″ x 5″ double GFI/rocker switch cover plate
$26.84
2″ x 6″ mud cap outside & radius down corner – left
$26.02
2″ x 6″ mud cap outside & radius down corner – right
$26.02
3″ x 3″ Victoria cap – outside frame corner
$26.02
3″ x 3-3/4″ radius cove
$13.04
3″ x 3″ field tile
$21.94
2-3/4″ hex dome field tile
$35.42
2-3/4″ hex flat field tile
$29.48
3” x 3” inside corner bullnose
$16.06
2-3/4″ hex flat field tile – 4 point trim
$2.92
2-3/4″ hex flat field tile – 5 point trim
$2.31
3″ x 3″ bevel field tile sold in 3.5 sq ft increments
$24.26
5″ x 5″ double switch & GFI/rocker switch combination cover plate
$26.84
3″ x 3″ Victoria cap – inside frame corner
$26.02
3″ x 6″ radius bullnose – short trim
$13.04
3″ x 6″ radius bullnose – long
$13.04
3″ x 6″ down corner – left
$16.06
3″ x 6″ down corner – right
$16.06
3″ x 6″ field tile
$17.32
3″ x 6″ inside corner bullnose – left
$16.06
3″ x 6″ inside corner bullnose – right
$16.06
3″ x 6″ bevel field tile sold in 3.5 sq ft increments
$19.08
3″ x 6″ tile-in Cup Holder
$88.72
3″ x 6″ robe hook
$88.72
3″ x 6″ recessed soap dish
$106.42
3″ x 6″ shelf support [buy 2 for a pair]
$66.52
3″ x 6″ towel bar end [buy 2 for a pair]
$66.52
3″ x 6″ radius cove – short
$13.04
3″ x 6″ radius cove – long
$13.04
3″ x 6″ radius down corner – left
$26.02
3″ x 6″ radius down corner – right
$26.02
3″ x 6″ bullnose – short
$10.72
3″ x 6″ bullnose – long
$10.72
3″ x 6″ Victoria cap
$13.53
3″ Victoria cap – outside corner
$26.02
3″ Victoria cap – radiused inside corner
$26.02
6-7/8″ x 5″ triple standard switch cover plate
$29.26
3″ Victoria cap – square inside corner
$26.02
6-7/8″ x 5″triple GFI/rocker switch cover plate
$29.26
3″ x 6″ Victoria cap – end stop left
$26.02
3″ x 6″ Victoria cap – end stop right
$26.02
3″ x 12″ field tile
$18.90
3″ x 12″ bullnose – short
$11.70
4-1/4″ x 4-1/4″ sanitary cove base
$16.64
4-1/4″ x 4-1/4″ cup holder
$88.72
4 1/4″ x 4 1/4″ radius bullnose
$17.93
4-1/4″ x 4-1/4″ field tile
$17.32
4 1/4″ x 4 1/4″ radius cove
$17.93
4-1/4″ x 4-1/4″ radius cove corner
$26.02
4 1/4″ x 4 1/4″ radius down corner
$26.02
3″ x 12″ bullnose – long
$11.70
4 1/4″ x 4 1/4″ down corner bullnose
$16.06
4 1/4″ x 4 1/4″ up corner bullnose
$16.06
4-1/4″ x 4-1/4″ robe hook
$88.72
4-1/4″ x 4-1/4″ soap dish
$106.42
4-1/4″ x 4-1/4″ shelf support [buy 2 for a pair]
$66.52
Sculptured Tile – Saul Bass Series – Diamond Pattern
$22.17
Sculptured Tile – Saul Bass Series – Sphere Pattern
$22.17
Sculptured Tile – Saul Bass Series – Star Pattern
$22.17
4-1/4″ x 4-1/4″ radius down corner
$26.02
4 1/4″ x 4 1/4″ radius up corner
$26.02
4-1/4″ x 4-1/4″ radius up corner
$26.02
4 1/4″ x 4 1/4″ surface bullnose
$10.72
4-1/4″ x 4-1/4″ square up corner
$26.02
6″ x 6″ down corner bullnose
$16.06
6″ x 6″ sanitary cove base
$16.34
6″ x 6″ sanitary cove base end stop – left
$21.18
6″ x 6″ sanitary cove base end stop – right
$21.18
4-1/4″ x 4-1/4″ towel bar end [buy 2 for a pair]
$66.52
4-3/8” x 6” bevel base molding
$17.93
4-3/8” x 6” bevel base molding – outside corner
$29.26
4-3/8” x 6” bevel base molding – inside corner
$29.26
6″ x 6″ basketweave field/border
$20.57
6″ x 6″ radius bullnose
$16.34
6” x 6” inside corner bullnose
$16.06
6″ x 6″ radius cove
$16.34
6″ x 6″ surface bullnose
$10.72
6″ x 6″ radius cove corner
$26.02
6″ x 6″ radius down corner
$26.02
6″ x 6″ Roman straight base moulding
$16.34
6″ x 6″ radius up corner
$26.02
6″ x 6″ recessed paper holder
$106.42
6″ x 6″ field tile
$17.32
6″ x 9″ field tile
$25.02
6″ x 9″ down corner bullnose – left
$16.06
6″ x 9″ down corner bullnose – right
$16.06
6″ x 9″ bullnose – short
$12.87
6″ x 6″ shoulder cove base
$17.93
6″ x 6″ square radius up corner
$26.02
6″ x 6″ shoulder cove base end stop – left
$21.18
6″ x 6″ shoulder cove base end stop – right
$21.18
6″ x 6″ recessed soap dish
$106.42
6″ x 9″ beadboard field tile
$25.02
6″ x 9″ bullnose – long
$12.87

Have a question about Heritage Tile or one of our portfolio collections? Contact our customer support team today.

Our experienced staff offers personalized guidance to help you achieve your unique vision and are available to answer your questions. Let’s get started.

SUBWAY CERAMICS

CATALOG

All Products

3″ bevel inside corner cove

3″ bevel outside corner round

6″ sanitary cove base – outside corner

Quarter cove 3-way corner

quarter cove – outside corner

Quarter round 3-way corner

2″ mud cap – inside corner

6″ Quarter Cove / Mud Cap inside corner

1/2″ x 6″ flat accent liner

1/2″ x 6″ flat liner liner – surface bullnose

6″ quarter round

6″ quarter round beak

6″ bullnose Quarter Round [for use with surface trim]

1/2″ x 6″ radius bullnose – short trim

1/2″ x 6″ radius cove – short trim

6″ Roman straight base moulding – outside corner

6″ shoulder cove base – outside corner

6″ quarter cove

6″ quarter cove beak/sanitary cove base – inside corner

6″ bullnose quarter cove – inside corner

2″ x 2″ smooth top P-cap molding – frame inside corner

Series 15 – Box Cap inside corner with 1″ inside radius

Series 15 – quarter cove – outside corner – 3 way

Series 15 – quarter cove – outside corner

Series 15 – quarter cove – inside corner – standard radius

Series 15 – quarter cove – inside corner – non-radius

6″ shoulder cove base – inside corner

2″ x 2″ P-cap molding – frame outside corner

2″ x 2″ P-cap molding – frame inside corner

2″ x 2″ smooth top P-cap molding – frame outside corner

Series 15 – 3″ x 4-1/2″ radius bullnose

Series 15 – 3″ x 7-3/8″ soft radius bullnose

Series 15 – 3″ x 12″ soft radius bullnose – LONG side

Series 15 – 3″ x 4-1/2″ radius cove

Series 15 – quarter cove – inside corner – 3 way

Series 15 – 6″ quarter cove

Series 15 – quarter round – ouside corner

Series 15 – quarter round – inside corner

Series 15 – quarter round – 3 way

Series 15 – 6″ quarter round

1-1/2″ x 6″ P-cap molding

1-1/2″ x 6″ P-cap molding – conventional outside corner return – left

1-1/2″ x 6″ P-cap molding – conventional outside corner return – right

1-1/2″ x 6″ P-cap molding – end stop – left

Series 15 – 3″ x 7-3/8″ soft radius cove

1-1/2″ x 6″ P-cap molding – end stop – right

Series 15 – 3″ x 12″ soft radius cove – LONG side

1-1/2″ x 6″ P-cap molding – inside corner cove – left

Series 15 – 1″ x 3″ square up corner – RIGHT

Series 15 – 3″ x 1″ square up corner – LEFT

1-1/2″ x 6″ extended P-cap molding – end stop – right

1-1/2″ x 6″ P-cap molding – inside corner cove – right

1-1/2″ x 6″ P-cap molding – bullnose end stop left

1-1/2″ x 6″ P-cap molding – bullnose end stop right

1-1/2″ x 6″ P-cap molding – radius outside corner return – left

1-1/2″ x 6″ P-cap molding – radius outside corner return – right

1-1/2″ x 6″ extended P-cap molding

1-1/2″ x 6″ extended P-cap molding – radius outside corner return – left

1-1/2″ x 6″ extended P-cap molding – radius outside corner return – right

1-1/2″ x 6″ extended P-cap molding – end stop – left

1-1/2″ x 6″ extended P-cap molding – inside corner cove – left

1-1/2″ x 6″ extended P-cap molding – inside corner cove – right

1-1/2″ x 6″ extended P-cap molding bullnose – end stop left

1-1/2″ x 6″ extended P-cap molding bullnose – end stop right

1-1/2″ x 6″ smooth top P-cap molding

1-1/2″ x 6″ smooth top P-cap molding – conventional outside corner return – left

1-1/2″ x 6″ smooth top P-cap molding – conventional outside corner return – right

1-1/2″ x 6″ smooth top P-cap molding – end stop – left

1-1/2″ x 6″ smooth top P-cap molding – end stop – right

1-1/2″ x 6″ smooth top P-cap molding – inside corner cove – left

1-1/2″ x 6″ extended/smooth top P-cap molding

1-1/2″ x 6″ extended/smooth top P-cap molding – radius outside corner return – left

1-1/2″ x 6″ extended/smooth top P-cap molding – radius outside corner return – right

1-1/2″ x 6″ extended/smooth top P-cap molding – end stop – left

1-1/2″ x 6″ extended/smooth top P-cap molding – end stop – right

1-1/2″ x 6″ smooth top P-cap molding – inside corner cove – right

1-1/2″ x 6″ smooth top P-cap molding – bullnose end stop – left